EdgeStar CRF321SS Owner's Manual - Page 5

Door Space Requirements

Get EdgeStar CRF321SS PDF manuals and user guides View all EdgeStar CRF321SS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 5 highlights

3) Slide the door down, away from the hinge pin located on the top of the door. 4) Remove the top cover first. Then unscrew the two screws from top bracket and replace on the other side. 5) To install the bracket on the left side of the appliance, screw the two screws through the bracket and into the top of the appliance. Slide the door back on to the top hinge. Ensure the door is face up. Replace the top cover on the top bracket by screw the two screws. 6) Screw the bottom hinge into place on the new side. Replace the foot on the other side. 7) Check that the door is aligned horizontally and vertically and that the seals are closed on all sides before finally tightening the bottom hinge. Readjust the leveling feet. Door Space Requirements The unit's door must be able to open fully as shown. W×D≥800mm×780mm W 4 D

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
4
3)
Slide the door down, away from the hinge pin located on the top of
the door.
4)
Remove the top cover first. Then unscrew the two screws from top
bracket and replace on the other side.
5) To install the bracket on the left side of the appliance,
screw the two screws through the bracket and into the top
of the appliance. Slide the door back on to the top hinge.
Ensure the door is face up. Replace the top cover on the
top bracket by screw the two screws.
6) Screw the bottom hinge into place on the new side.
Replace the foot on the other side.
7)
Check that the door is aligned horizontally and vertically and that
the seals are closed on all sides before finally tightening the
bottom hinge. Readjust the leveling feet.
Door Space Requirements
The unit's door must be able to open fully as shown.
W×D
≥
800mm×780mm
W
D