EdgeStar CWR461DZ Owner's Manual - Page 7
Installation Clearance Requirements
View all EdgeStar CWR461DZ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Important Notes: • Choose a location that has ambient temperatures above 50°F and below 95°F. Operation outside these temperatures may result in lowered efficiency or cause other adverse effects. • This unit MUST be installed in an area protected from the elements, e.g., wind, rain, water spray or drips. • The wine refrigerator should not be located next to ovens, grills or other high heat sources. • Do not kink or pinch the power supply cord between the wine refrigerator and wall or cabinet. Installation Clearance Requirements When installing the wine refrigerator under a counter, follow the recommended spacing dimensions shown. • To ensure proper service access and ventilation, allow at least 2/5" clearance at the back, 1/5" at top and 1/5" at sides. The installation should allow the unit to be pulled forward for servicing, if necessary. Top View Back of unit Side View Door Hinge • The wine refrigerator should be installed on a firm and level surface that will be able to support the entire weight of a fully loaded unit. It is important for the wine refrigerator to be level in order to work properly. If needed, you can adjust the height of the wine refrigerator by rotating the feet. See the "Leveling the Wine refrigerator" section. • A standard electrical supply (115 VAC only, 60 Hz), properly grounded in accordance with National Electrical Code and local codes and ordinances is required. EdgeStar Wine Refrigerator 4