EdgeStar IB650SS Owner's Manual - Page 16

Control Panel

Get EdgeStar IB650SS PDF manuals and user guides View all EdgeStar IB650SS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

Control Panel (Inside of the front panel) Descriptions of LEDs and buttons: 1. Ice Full (Red) LED: Ice Full indicator light. When this LED is lit, the ice storage bin is full of ice or there is something obstructing the ice-full probe. The unit will stop working. When ice cubes are taken out of the ice storage bin, clearing the ice-full probe, the red LED will keep flashing for 3 minutes. Then the unit will restart and return to the ice making mode. 2. Ice Making (Green) LED: Ice Making indicator light. When this LED is lit, the unit is working in the Ice Making mode controlled by a temperature probe on the evaporator. When the green LED is flashing, the unit is working in the Ice Making mode controlled by a fixed timer. 3. Ice Harvest (Yellow) LED: Ice Harvest indicator light. When this LED is lit, the unit is working in the Ice Harvest mode controlled by the ice-full probe. When the green and yellow LEDs are lit, the unit is working in the cold preservation stage. 4. Clean button: When this button is pressed, the unit enters the Cleaning mode. The green and yellow LEDs flash together. To stop the Cleaning mode, just press the button again. 4. Mode button: Mainly for service. When this button is pressed, unit can change from Ice Making mode to Ice Harvest mode, or from Ice Harvest mode to Ice Making mode. You can judge the mode from the status of the green and yellow LEDs. 5. Ice size adjust: Turn the screw clockwise, and the size of will be longer. Turn the knob counterclockwise, and the ice size will be smaller in the next cycle. IMPORTANT: • It is not recommended that the ice size be adjusted unnecessarily since this could damage the machine's controls. • Do not let water contact the control box. • If the red, green and yellow LEDs are flashing together, the machine is not working. The major fuse of the control box has failed. Call for service. Major Functions 1. Completely automatic operation. 2. When the ice storage bin is full, the machine stops making ice and proceeds to the cold preservation stage automatically. It starts making ice again once the cubes are removed. 3. The different colors of the LED display indicate various operating modes. 4. The fan motor responds to the ambient temperature. If it is cold, the motor will stop working to keep the cooling system in good working condition. 5. Ice cube size is adjustable. 6. A sensitive probe and accurate timer enhance the performance of the ice maker. 7. Built-in compressor protection system. 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
13
Control Panel
(Inside of the front panel)
Descriptions of LEDs and buttons:
1.
Ice Full (Red) LED:
Ice Full indicator light.
When this LED is lit, the ice storage bin is full of ice or there is
something obstructing the ice-full probe. The unit will stop working.
When ice cubes are taken out of the ice storage bin, clearing the
ice-full probe, the red LED will keep flashing for 3 minutes.
Then the unit will restart and return to the ice making mode.
2.
Ice Making (Green) LED:
Ice Making indicator light.
When this LED is lit, the unit is working in the Ice Making mode
controlled by a temperature probe on the evaporator. When the
green LED is flashing, the unit is working in the Ice Making mode
controlled by a fixed timer.
3.
Ice Harvest (Yellow) LED:
Ice Harvest indicator light.
When this LED is lit, the unit is working in the Ice Harvest mode
controlled by the ice-full probe. When the green and yellow LEDs
are lit, the unit is working in the cold preservation stage.
4.
Clean button:
When this button is pressed, the unit enters the
Cleaning mode. The green and yellow LEDs flash together. To stop
the Cleaning mode, just press the button again.
4.
Mode button:
Mainly for service. When this button is pressed,
unit can change from Ice Making mode to Ice Harvest mode, or
from Ice Harvest mode to Ice Making mode. You can judge the
mode from the status of the green and yellow LEDs.
5.
Ice size adjust:
Turn the screw clockwise, and the size of will be
longer. Turn the knob counterclockwise, and the ice size will be
smaller in the next cycle.
IMPORTANT:
•
It is not recommended that the ice size be adjusted unnecessarily since
this could damage the machine’s controls
.
•
Do not let water contact the control box.
• If the red, green and yellow LEDs are flashing together, the machine is
not working. The major fuse of the control box has failed. Call for service.
Major Functions
1. Completely automatic operation.
2. When the ice storage bin is full, the machine stops making ice
and proceeds to the cold preservation stage automatically. It starts
making ice again once the cubes are removed.
3. The different colors of the LED display indicate various operating
modes.
4. The fan motor responds to the ambient temperature. If it is cold,
the motor will stop working to keep the cooling system in good
working condition.
5. Ice cube size is adjustable.
6. A sensitive probe and accurate timer enhance the performance
of the ice maker.
7. Built-in compressor protection system.