EdgeStar IP210SS Owner's Manual - Page 8
Using the Control Panel - portable
View all EdgeStar IP210SS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Using the Control Panel IMPORTANT: Do not power on the unit without any water. Power Use the On/Off button to turn the portable ice maker on and off. The Power Indicator light will be solid green when the unit is in the "On" position. If the power light is blinking on and off, the unit is in standby mode, and indicates the unit is plugged in. Ice Size Selector Use the Select button to switch the ice size between small "S", medium "M" and large "L". The S indicator light corresponds to small ice, the M indicator light corresponds to medium ice, while the L indicator light corresponds to large ice. Ice Full When the Ice Full indicator light is on, transfer ice from the basket. The ice maker automatically stops when the ice basket is full. Add Water While the ice maker is on, verify the water level periodically. If the water level is too low, the ice maker will stop automatically, and the "Add Water" indicator will turn on. Press the "On/Off" button, fill the unit with water and press "On/Off" again. Allow the refrigerant insider the compressor at least 3 minutes to settle before restarting. NOTE: Change the water in the water reservoir every 24 hours to ensure a reasonable hygiene level. If the ice maker will not be used for an extended period of time, you should drain the water from the reservoir and wipe out the inside of unit. 5