EdgeStar KC1000SS Owner s Manual - Page 10

Exterior Cleaning, TROUBLESHOOTING

Page 10 highlights

Exterior Cleaning The door and cabinet may be cleaned with a mild detergent and lukewarm water solution such as 2 tablespoons of baking soda to 1 quart of water. Do not use solvent based or abrasive cleaners. Use a soft sponge and rinse with clean water. Wipe with a soft clean towel to prevent water spotting. If the door panel is stainless steel, it can discolor when exposed to chlorine gas and moisture. Clean stainless steel with a cloth dampened with a mild detergent and warm water solution. Never use an abrasive or caustic cleaning agent. Interior Cleaning The kegerator's interior should be cleaned occasionally. 1. Disconnect power to the unit. 2. Open the door and remove the contents. 3. Wait until the unit defrosts. 4. With a clean cloth, wipe down the interior of the unit. 5. Reconnect power to the unit. TROUBLESHOOTING Before Calling for Help If the unit appears to be malfunctioning, read through the OPERATION section of this manual first. If the problem persists, check the Troubleshooting Guide below and on the following page. The problem could be something that can easily be solved or explained. Symptoms The kegerator turns on and off frequently. Possible causes The room temperature is higher than the recommended ambient environment. The door is being opened often. The door is not completely closed. Solutions Run the unit at the appropriate ambient temperature. Minimize the number of times the door is opened. Make sure the door is completely closed. The door gasket is not sealing properly. Make sure the door gasket is properly sealing. 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14

7
Exterior Cleaning
The door and cabinet may be cleaned with a mild detergent and
lukewarm water solution such as 2 tablespoons of baking soda to 1
quart of water.
Do not use solvent based or abrasive cleaners. Use a soft sponge
and rinse with clean water. Wipe with a soft clean towel to prevent
water spotting. If the door panel is stainless steel, it can discolor
when exposed to chlorine gas and moisture. Clean stainless steel
with a cloth dampened with a mild detergent and warm water
solution. Never use an abrasive or caustic cleaning agent.
Interior Cleaning
The
kegerator’s
interior should be cleaned occasionally.
1. Disconnect power to the unit.
2. Open the door and remove the contents.
3. Wait until the unit defrosts.
4. With a clean cloth, wipe down the interior of the unit.
5. Reconnect power to the unit.
TROUBLESHOOTING
Before Calling for Help
If the unit appears to be malfunctioning, read through the
OPERATION section of this manual first. If the problem persists,
check the Troubleshooting Guide below and on the following page.
The problem could be something that can easily be solved or
explained.
Symptoms
Possible causes
Solutions
The kegerator turns on
and off frequently.
The room temperature is
higher than the
recommended ambient
environment.
Run the unit at the appropriate ambient temperature.
The door is being opened
often.
Minimize the number of times the door is opened.
The door is not completely
closed.
Make sure the door is completely closed.
The door gasket is not
sealing properly.
Make sure the door gasket is properly sealing.