EdgeStar KC7000BLTWIN Owner s Manual - Page 9
Reversing the Door Swing
View all EdgeStar KC7000BLTWIN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Reversing the Door Swing Follow the instructions below to reverse the door swing. IMPORTANT: Before you begin, unplug the refrigerator. To reverse the door from right swing to left swing: 1. Open the door and using a Phillips screwdriver, remove the bottom screws from the lower hinge. 2. Carefully slide the bottom of the door forward and down, and place it on a padded surface to prevent damaging it. 3. Remove the screws from the upper right hinge. Place the upper right hinge in a safe place in case you need to reverse the door in the future. Remove the plastic caps from the upper left hinge corner. Install the upper left hinge by fastening the screws through the left hinge to the cabinet. Insert the plastic caps to the upper right corner. 4. Remove the bottom right support bracket. Remove the plastic caps from the bottom left hinge corner. Insert the plastic caps to the bottom right corner. Install the bottom left support bracket from the plastic bag that was included with the instruction manual. 5. Carefully insert the door into the upper left corner hinge. Install the lower hinge on the left corner of the door. 6. Slide the door on top of the lower hinge and secure the door by installing the lower screws. EdgeStar Built-in Kegerator 6