EdgeStar PAC1201W Owner's Manual - Page 16

Using the Remote Control The remote control can be used instead of the control panel to remotely operate your portable air conditioner. The functions on the remote are the same as on the control panel. NOTES: Be careful not drop the remote control. Do not place the remote control in a location exposed to direct sunlight. Mode Button Swing Button Reset Button Up Button Power Button Fan Speed Button Timer On Button Sleep Button Timer Off Button Lock Button LED Display Button Button On/Off Mode Speed Timer On Timer Off Temp Up Temp Down Swing Economy Reset Lock LED Function Powers the unit on or off. Changes between auto, cool, dehumidify and fan modes. Sets the fan speed between low, medium, high, or auto. Used to enable the On timer and set the timed hours. Used to enable the Off timer and set the timed hours. Increases the set temperature by 2 degree increments Decreases the set temperature by 2 degree increments Stops or starts louver movement and sets the desired angle. Enables the Sleep mode Used to cancel all controller settings Used to lock all controller settings and prevent settings from changing Used to light the display Installing the batteries 1) Remove the cover on the back of the remote control. 2) Insert the batteries with the (+) and (-) ends pointing in the correct direction. 3) Slide the cover back on. CAUTION: Use only AAA batteries. Remove the batteries if the remote control will not be used for one month or longer. Do not attempt to recharge batteries not designed to be recharged. All batteries should be replaced at the same time. Do not mix old and new batteries. Do not dispose of batteries in a fire as they may explode. 13