EdgeStar TWR160S Owner's Manual - Page 11
Maintenance
 |
View all EdgeStar TWR160S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Maintenance It is important to clean the internal components located to the back of this unit about every six months. 1. Disconnect power to the unit. 2. Remove all screws from the external back panel of your unit and remove cover. 3. Use a soft brush vacuum attachment to gently clean the fan including the cooling fins and the circuit board as pictured below: (Rear of unit with cover removed) Circuit Board Fan with Cooling Fins 4. Reinstall the rear cover. 5. Reconnect power to this unit. NOTE: It is recommended to always run your unit through a surge protector. A surge protector will not only protect your unit from power surges but also help to lengthen the life of your wine cooler. Thermoelectric Wine Cooler 8
-
1 -
2
-
3
-
4
-
5
-
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13 -
14 -
15
 |
 |
Thermoelectric Wine Cooler
8
Maintenance
It is important to clean the internal components located to the back of
this unit about every six months.
1. Disconnect power to the unit.
2. Remove all screws from the external back panel of your unit and
remove cover.
3. Use a soft brush vacuum attachment to gently clean the fan including
the cooling fins and the circuit board as pictured below:
(Rear of unit with cover removed)
4. Reinstall the rear cover.
5. Reconnect power to this unit.
NOTE:
It is recommended to always run your unit through a surge
protector.
A surge protector will not only protect your unit from power
surges but also help to lengthen the life of your wine cooler.
Circuit Board
Fan with Cooling
Fins