EdgeStar VBR240 Owner's Manual - Page 11
Installation Checklist Before Operation, Using the Temperature Control Panel
![]() |
View all EdgeStar VBR240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
OPERATION Installation Checklist Before Operation 1. Have all packing materials and tape been removed from the interior and exterior of the beverage cooler? 2. Have the installation instructions been followed, including connecting the machine to electricity? And has proper grounding been installed for the beverage cooler? 3. Has the machine been leveled? 4. Is the beverage cooler in a site where the ambient temperature is between 60ºF and 90ºF all year round? Using the Temperature Control Panel Note: Whether your beverage cooler can reach the actual set temperature depends on the ambient environmental conditions. Basic Functions To turn the beverage cooler on/off, press and hold the button for five (5) seconds. (power) Use the up and down buttons to adjust the temperature. The temperature displayed can be in Fahrenheit or Celsius. This beverage cooler has a temperature range from 36°F to 43°F or 2°C to 6°C. To toggle between Fahrenheit and Celsius display, press and hold the (5) seconds. button for five Press the button on the control panel to lower the temperature by one (1) degree increments. Press the button on the control panel to raise the temperature by one (1) degree increments. Caution: If you powered off the unit, please wait at least 5 minutes before powering it back on. 9 Press the button to toggle between interior lighting modes. By default, the unit will be in functional mode. In this mode, the interior light will only turn on when the door is open. This unit is also equipped with a showcase mode. In showcase mode, the interior light always stays on. This beverage cooler has two displays, a Set Display that shows the set temperature, and a Current Temperature Display that shows the current temperature. Note: It is normal to see the set temperature and current temperature displays being a few degrees off from each other. If, however, the current temperature deviates more than 9°F from the set temperature, the display will continue to flash.
![](/manual_guide/products/edgestar-vbr240-owners-manual-9c096ce/11.png)