Edimax 3G-6200nL Manual - Page 30
3G/3.5G - driver download
View all Edimax 3G-6200nL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
2-4-1 3G/3.5G 3G-6200nL supports most of 3G/3.5G modem cards, just connect the modem card to the USB port of 3G-6200nL and 3G-6200nL will recognize it automatically, no additional setup procedure required. However, some of modem cards require PIN code or account / password (you have to use 3G-6200nL's web interface to input these information), and some modem cards requires you to connect the modem card with your PC and install driver / utility before you connect it with 3G-6200nL (all PCs which need to access Internet by 3G-6200nL requires to perform this procedure once). If you still not able to connect to Internet, please use wired Internet connection to access our website : http://www.edimax.com/ , download latest version of firmware and upgrade 3G-6200nL's firmware. If you still not be able to get connected by your 3G/3.5G modem card, please contact your dealer of purchase and provide the model name of the 3G/3.5G modem card you have, we'll try our best to help you to solve the problem. Only one Internet connection (wireless / wired) can be used at the same time. Wireless connection (3G/3.5G) will be selected first, and use wired Internet connection as backup. Therefore, please DO NOT connect your 3G/3.5G modem card with 3G-6200nL, or your telecomm service provider may charge you with high communication fee. The default setting is for you to connect with computer or switch to extend network. If you would like to access Internet via xDSL/Cable modem, you can login 3G-6200nL to enable WAN function. For example, if you connect 3G/3.5G modem card with 3G-6200nL when you're using wired Internet connection, wired connection will be dropped and use 3G/3.5G wireless connection instead. If 3G/3.5G wireless signal reception is poor and the connection can not be restored within 60 seconds, 3G-6200nL will use wired Internet connection again, and will not switch back to wireless Internet connection (This only happens with wired Internet connection is available. If wired connection is unavailable, 3G-6200nL will try to establish 3G/3.5G wireless connection again and again). If you want to use 3G/3.5G wireless connection again, you need to remove 3G/3.5G modem card from 3G-6200nL and reconnect it back after 5 seconds. ( A ) Plug and play, no setup procedure required. Connect the USB 3G/3.5G modem card with 3G-6200nL and make sure the corresponding USB LED indicator of 3G-6200nL lights up, then you can use the web browser to access Internet. 30