Edimax 3G-6408n Manual - Page 67
GHz B+G+N: Allows 802.11b, 802.11g,
View all Edimax 3G-6408n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
2.4GHz (G): Allows 802.11g wireless network clients to connect to this router (maximum transfer rate 54Mbps). ESSID Channel Number Associated Clients 2.4GHz (B+G+N): Allows 802.11b, 802.11g, and 802.11n wireless clients to connect to this router (recommended). This is the name of your router. You can type any alphanumerical character here (maximum 32 characters). Select a channel from the dropdown menu. You can select the channel of your preference (1 to 13). Click "Show Active Clients" for the list of all connected wireless clients. Click "Refresh" in the new window to renew the list, and click "Close" to close the window. Wireless Module Note: If you have a pop-up blocker installed, you may have to disable it, or set it to allow the pop-up window to show up. Select "Enable" to turn on the 2.4GHz wireless signal and select "Disable" to turn it off. Click "Apply" to save the changes, or click "Cancel" to discard the changes. After you have clicked "Apply", you will see the following message: Click "Apply" to save the changes and restart the broadband router. It takes about 60 seconds for the broadband router to restart. Click "Continue" to configure other settings. 66