Edimax AR-7211A V2 Datasheet - Page 2

www.edimax.com 1WAN+1LAN ADSL2/2+ Modem Router FEATURES AND TECHNICAL SPECIFICATIONS AR-7211A V2 / AR-7211B V2 INTERFACE ADSL FEATURES & ENCAPSULATION HARDWARE • 1 RJ-11 ADSL port + 1 LAN 10/100Mbps Ethernet • Supports ANSI T1.413 Issue2 • Chipset RTL8671B-VE Port • Supports ITU G.992.1 (G.dmt)/G.992.2 (G.lite) • Flash 2M • 1 push button for power on/off Annex A • Memory 8M • 1 reset button • Supports ITU G.992.3 ADSL2 (G.dmt.bis) Annex A, • DC 5V, 1A • 1 power jack L, M • LED Indicators: Power, ADSL , Internet and LAN • Supports ITU G.992.4 ADSL2 (G.lite.bis) • Supports ITU G.992.5 ADSL2+ • RFC 1483 Route/Bridge • PPPoA/PPPoE/MER SECURITY FUNCTIONS TEMPERATURE & HUMIDITY • Supports two-level usernames and passwords for • Supports up to 8 permanent virtual circuits (PVCs) login • Routing: Static routing, RIP V1 and V2 • Supports electronic signature function • Supports Auto-MDI/MDIX • Supports DoS which detects and protects against • Download/Upload stream up to 24/1Mbps a number of attacks (such as SYN/FIN/RST Flood, Smurf, WinNuke, Echo Scan, Xmas Tree Scan) • Supports packet filtering based on IP and port • Supports access control based on MAC address • Supports PAP and CHAP authentication • Supports firewall function Operating: 0 to 40℃ Storage: -20 to 70℃ Operating: 10 to 85% RH (Noncondensing) Storage: 5 to 95% RH (Noncondensing) MANAGEMENT ROUTING /BRIDGING DIMENSIONS & CERTIFICATIONS • Supports Web/TFTP mode • RFC 1483 Bridge • Web interface configuration • IEEE 802.1D transparent bridging • Supports Telnet CLI command line • Bridge filtering • Reset function: via hardware reset or web • RFC 1483 Router interface reset • RIP 1 & 2 supported • Supports configuration file backup and • DHCP (RFC1541) Server, Relay restoration • Network Address Translation (NAT)/ Network • Supports LAN port IP address amend function Address Port Translation (NAPT) • Supports system log function • DNS relay • Supports SNMP V1/V2C native and long-distance • IGMP v1 and v2 control (MIB II RFC1213/ADSL line MIB RFC 2662 ATM MIB RFC 2515) • Supports SNTP enactment • WAN Management Protocol (TR-069) • 145 x 112 x 34 mm • 300g • CE NETWORK SETUP DIAGRAM AND RELATED PRODUCTS An example of how the AR-7211A / AR-7211B V2 can be set up: • Connect the router's ADSL port to the Internet service provider via RJ-11. • Connect a computer to the LAN port and set up the Internet connection with the EZmax setup wizard. • Share the Internet connection with other wired computers/devices. Copyright © 2012 Edimax Technology Co. Ltd. All rights reserved. Maximum performance, actual data rates, and coverage will vary depending on network conditions and environmental factors. Product specifications and design are subject to change without notice.