Edimax BR-6228nS V2 Quick Installation Guide - Page 7

Troubleshooting 1. In range extender mode, how do I connect to a network which has a hidden SSID? a. During iQ Setup select "Setup extender manually" as shown below. Manually enter the SSID of the hidden network, an SSID for your device and the encryption information for the hidden network. SSID Device SSID Encryption Enter the SSID (network name) of your existing, hidden network. Enter an SSID for the BR‐6228nS V2/nC V2 or use the default which consists of your existing router's SSID (above) +"_2EX". Enter the encryption information for your existing, hidden network. 2. I can't access the Internet. a. Ensure that all cables are connected properly. Try a different Ethernet cable. b. Check if you can access the web based configuration interface. If not, please ensure your computer is set to use a dynamic IP address. Refer to the user manual for guidance if you are unsure how to do this. c. Login to the web based configuration interface and go to Internet > WAN Setup and check that the connection type is correct. If you are unsure which internet connection type you have, please contact your Internet Service Provider (ISP). 6