Edimax BR-6524n Manual - Page 92
Root AP SSID
View all Edimax BR-6524n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Channel Number Associated Clients Select the channel number you wish to use; all access points must use the same channel. Click 'Show Active Clients' button to show the list of all connected wireless clients. You can click 'Refresh' in new window to get latest list again, or click 'Close' to close the window. Root AP SSID Site Survey Please note that if you have pop-up blocker installed, you may have to disable it or tell your pop-up blocker to allow the popup window, or you will not be able to see the wireless client list window. Please input the SSID of the wireless access point you wish to extend signal coverage. Click 'Select Site Survey' and a popup window will appear. All reachable wireless access points will be shown in the window. Select the wireless access point you wish to connect from the list, and click 'Done'. If the wireless access point you wish to connect is not listed, you can click 'Refresh' to rescan. If you still can't find the wireless access point you wish to connect, please move the broadband router to the place nearer to the access point you wish to connect. When you finished with the settings in this page, you can click 'Apply' button to save changes you made in this page, or you can click 'Cancel' to discard changes. After you click 'Apply' button, you'll see the following messages: