Edimax ES-5160G V2 Manual - Page 41
Appendix- Command Line Interface
View all Edimax ES-5160G V2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Appendix- Command Line Interface Start-up and Terminal configuration To start-up the command line interface, please connect a PC COM port to the RS-232 connector and activate a terminal emulation software (e.g. HyperTerminal of Windows). The terminal emulation software should be started as the following configuration: 1. Data rate: 115200 baud. 2. Data format: 8 data bits, 1 stop bit and no parity. 3. Flow control: none. 4. Click the property icon, select settings, make sure that: "The Function, arrow, and ctrl keys act as": Terminal keys. "Emulation": VT 100. Login/Logout Procedures To get access to the CLI, you will have to Key in the password to pass the authentication. The factory default value of Password is blank, or other random value. Note: We recommend users to configure a new password to prevent unauthorized users from accessing to the device. 40