Edimax EW-7303HPn V2 Datasheet - Page 2
Extender with Built-in 12dBi Antenna - supporter
View all Edimax EW-7303HPn V2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
www.edimax.com N150 High Power Outdoor Wireless Access Point/Range Extender with Built-in 12dBi Antenna Features • Complies with IEEE 802.11b/g/n standards • Supports 2.4000 to 2.4835GHz frequency bands • Network data rates up to 150Mbps • Auto rate fallback in cases of interference • Features WDS (Wireless Distribution System) repeater mode • Supports WDS with AP mode • Supports WEP, WPA, WPA2, AE2, 802.1x authentication • Features WPS (Wi-Fi Protected Setup) • Web-based configuration interface • Firmware upgradable • Features LNA (Low Noise Amplifier) • Supports gateway, bridge and WISP operation modes • Supports VPN pass-through for PPTP, IPsec and L2TP connections EW-7303HPn V2 Specifications Product Frequency Bands Flash RAM LAN Port Antenna Output Power Power Dimensions Weight Temperature Humidity Certification 150Mbps Wireless High Power Outdoor Range Extender/Access Point 2.4 - 2.484GHz 4MB NOR Flash 32MB SDRAM 10/100M Passive PoE Port x 1 Internal: 12dBi directional panel antenna External (optional): SMA connector 11n: 22±1dBm, -89dBm 11g: 26±1dBm, -91dBm 11b: 27±1dBm, -93dBm 12V DC, 1A 225 (H) x 77 (W) x 59 (D) mm 250g (8.82oz) Operating: -20 to 70°C Operating: 10-90% (non-condensing) Storage: Max. 95% (non-condensing) FCC *Maximum performance, actual data rates and coverage may vary depending on network conditions and environmental factors. Stated ranges are based on independent test results and are not guaranteed. Long range coverage requires an additional high power access point to receive the wireless signal from the EW-7303HPn V2 - coverage range from an EW-7303HPn directly to a computer/wireless device is significantly less. Copyright © 2012 Edimax Technology Co. Ltd. All rights reserved. Product specifications and design are subject to change without notice.