Edimax HP-2002APn User Manual - Page 52
Registrar, Wi-Fi Protected Setup, Apply, WPS Status
View all Edimax HP-2002APn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Step 2 Select Registrar mode on the wireless client and enter the PIN code of the HP-2002APN. See the following figure: 3) PBC Mode Step 1 On the Wi-Fi Protected Setup page, select the PBC mode, and then click the Apply button. You may also press the WPS button on the rear panel. Step 2 Enable the PBC function on the wireless client. In that case, HP-2002APN and wireless client will automatically establish connection. WPS Status 50
50
Step 2
Select
Registrar
mode on the wireless client and enter the PIN code of
the HP-2002APN. See the following figure:
3) PBC Mode
Step 1
On the
Wi-Fi Protected Setup
page, select the
PBC
mode, and then
click the
Apply
button. You may also press the
WPS
button on the rear
panel.
Step 2
Enable the PBC function on the wireless client. In that case,
HP-2002APN and wireless client will automatically establish connection.
°
WPS Status