Edimax IC-3005 Manual - Page 58

Utilities

Get Edimax IC-3005 PDF manuals and user guides View all Edimax IC-3005 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 58 highlights

2.8.3 Utilities This menu allows you to upgrade firmware, clear all settings, reboot the IP camera, and switch LED lights on/off. The descriptions of every setting in this menu will be given below: Item Upgrade Firmware Description If you downloaded latest firmware file from our website, you can click „Browse‟ button to pick the firmware file you wish to use. Then click „Upgrade‟ button to start firmware upgrade procedure. Reset It's recommended to use wired Ethernet connection when you use this function, and DO NOT DISCONNECT OR CLOSE WEB BROWSER DURING UPGRADE! Clear all settings in the camera. Please think again before you do this, and then click this button to reset all settings. Reboot Device LED Setting NOTE: IP address will be reset to default value '192.168.2.3' also. You'll need to change the IP address setting of your computer if the IP address of your computer does not begin with '192.168.2', and subnet mask is not '255.255.255.0', or you'll not be able to connect to this IP camera again. If you found the IP camera is responding slowly or behaves strange, you can click this button to try to reboot the IP camera, this may help. Switch the LED light of this IP camera off, so „LAN‟ and „WLAN‟ LED on the IP camera will stop working, in case 58

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
58
2.8.3 Utilities
This menu allows you to upgrade firmware, clear all settings, reboot the IP
camera, and switch LED lights on/off.
The descriptions of every setting in this menu will be given below:
Item
Description
Upgrade
Firmware
If you downloaded latest firmware file from our website,
you can click
„
Browse
‟
button to pick the firmware file you
wish to use. Then click
„
Upgrade
‟
button to start firmware
upgrade procedure.
It
’
s recommended to use wired Ethernet connection
when you use this function, and DO NOT DISCONNECT
OR CLOSE WEB BROWSER DURING UPGRADE!
Reset
Clear all settings in the camera. Please think again
before you do this, and then click this button to reset all
settings.
NOTE: IP address will be reset to default value
‘
192.168.2.3
’
also. You
’
ll need to change the IP address
setting of your computer if the IP address of your
computer does not begin with
‘
192.168.2
’
, and subnet
mask is not
‘
255.255.255.0
’
, or you
’
ll not be able to
connect to this IP camera again.
Reboot Device
If you found the IP camera is responding slowly or
behaves strange, you can click this button to try to reboot
the IP camera, this may help.
LED Setting
Switch the LED light of this IP camera off, so
„
LAN
‟
and
„
WLAN
‟
LED on the IP camera will stop working, in case