Edimax IC-3005Wn Manual - Page 11
Camera Installation
View all Edimax IC-3005Wn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
1.5 Camera Installation 1. Unpack your Edimax IP Camera from its packaging and ensure that all the items listed in Chapter 1 are there. 2. Connect the Edimax IP Camera to your network by attaching a network cable from your switch or router to the LAN port on the IP Camera. 3. Connect the power adapter to the IP Camera and plug the adapter into a power outlet. When the IP Camera is ready, the Blue LED will light up. Note: It is highly recommended to use only the power adapter shipped with the IP Camera. Do NOT use any other power adapter and avoid possible damage to your new device. 11
11
1.5 Camera Installation
1. Unpack your Edimax IP Camera from its packaging and ensure that all the
items listed in Chapter 1 are there.
2. Connect the Edimax IP Camera to your network by attaching a network
cable from your switch or router to the LAN port on the IP Camera.
3. Connect the power adapter to the IP Camera and plug the adapter into a
power outlet. When the IP Camera is ready, the Blue LED will light up.
Note:
It is highly recommended to use only the power adapter shipped with the
IP Camera. Do NOT use any other power adapter and avoid possible damage
to your new device.