Edimax IC-7110P Manual - Page 31
Logging in the Management Interface
View all Edimax IC-7110P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
1.8 Logging in the Management Interface Make sure the network camera is correctly powered (Power LED is on), and then launch Internet Explorer and type the IP address of the network camera in address bar of Internet Explorer. You should be prompted to input the user name and password: Default user name is „admin‟ and password is „1234‟. Click „OK‟ to continue after user name and password has entered. If you‟re rejected, maybe the password has been modified previously. This should not happen if this is a newly-purchased camera, however, if you get the camera from someone else, the password would be changed. Please try to obtain the correct user name / password, or you‟ll have to reset the camera. 30
30
1.8 Logging in the Management Interface
Make sure the network camera is correctly powered (Power LED is on), and
then launch Internet Explorer and type the IP address of the network camera in
address bar of Internet Explorer. You should be prompted to input the user
name and password:
Default user name is
„
admin
‟
and password is
„
1234
‟
. Click
„
OK
‟
to continue
after user name and password has entered.
If you
‟
re rejected, maybe the password has been modified previously. This
should not happen if this is a newly-purchased camera, however, if you get the
camera from someone else, the password would be changed. Please try to
obtain the correct user name / password, or you
‟
ll have to reset the camera.