Edimax PS-1206MF Manual - Page 34
Wireless Configuration - default password
View all Edimax PS-1206MF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
5.7 Wireless Configuration Wireless Configuration Double-click the "Wireless" button. Enter user name and password then the wireless configuration window will popup. The default username and password are ''admin'' and ''1234'', and you are into the steps of ''Infrastructure Mode". Function: You can select "Auto", Enable" or "Disable" to manually configure the wireless function. Auto - "Auto" is the default setting of the MFP Server. At this mode, the MFP Server will automatically decide to enable or disable the wireless function. When the MFP Server starts up, it will auto-detect if the LAN port is connected to an active network by an Ethernet cable. If this is the case, the MFP Server will run in Ethernet mode. If the MFP Server is not connected to an active network by Ethernet cable, the MFP Server will run in wireless LAN mode. Users can plug the Ethernet cable into the MFP Server, after configuring the MFP Server features and wireless settings; they can unplug the Ethernet cable to enable the wireless connection. This makes the configuration much easier without creating the wireless connection in advance. Note: After you have set the wireless function, please remove the Ethernet cable and then re-plug the power jack of the MFP Server to activate the 23