Edimax VD-233ED Manual - Page 39
Image Setting
View all Edimax VD-233ED manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
3-5-1 Image Setting You can adjust the image parameters in this page. Here are the descriptions of every setup item: Item Description Brightness / Control the image parameters. Click ' - ' to decrease value, or click Contrast / ' + ' to increase value. You can also input the value in the field Saturation / directly. Sharpness Default Set all above values to default value '128'. Mirror Check 'Vertical' or 'Horizontal' box to flip the image vertically or horizontally, this will help to correct the orientation of image when IP camera is hanged bottom-up by camera holder. You can click both 'Vertical' and 'Horizontal' box at the same time. 38
38
3-5-1 Image Setting
You can adjust the image parameters in this page.
Here are the descriptions of every setup item:
Item
Description
Brightness /
Contrast /
Saturation /
Sharpness
Control the image parameters. Cl
ick ‘
-
‘
to decrease value, or click
‘ + ‘ to increase value. You can also input the value in the field
directly.
Default
Set all above values to default value ‘128’.
Mirror
Check ‘Vertical’ or ‘Horizontal’ box to flip the image vertically or
horizontally, this will help to correct the orientation of image when
IP camera is hanged bottom-up by camera holder.
You can click both ‘Vertical’ and ‘Horizontal’ box at the same time.