Edimax WP-S1300 Quick Install Guide - Page 8
Projector Server Setup
View all Edimax WP-S1300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Projector Server Setup If you plan on putting the projector server on a desk or other horizontal surfaces, stick the foot pads on the 4 locations as indicated is the picture. Skip this step if you plan on hanging the projector server on the wall. Connect the Ethernet cable to the LAN port (this port is labeled as "LAN" and is located at the back of this projector server). Connect the projector server to an amplifier or a set of speakers via the audio port. You can skip this step if you do not have an amplifier or speakers. 8
8
Projector Server Setup
If you plan on putting the projector
server on a desk or other horizontal
surfaces, stick the foot pads on the 4
locations as indicated is the picture.
Skip this step if you plan on hanging
the projector server on the wall.
Connect the Ethernet cable to the
LAN port (this port is labeled as
“
LAN
”
and is located at the back of this
projector server).
Connect the projector server to an
amplifier or a set of speakers via the
audio port.
You can skip this step if you do not
have an amplifier or speakers.