Electrolux CEI30IF4LS Complete Owner's Guide (English) - Page 42

Sabbath Feature

Page 42 highlights

42 Oven Controls SABBATH FEATURE (CONTINUED) Note: You may change the oven temperature once baking has started. The HI + key pad will hi increase the temperature by 5°F (2°C) at each key press. The LO - key pad will decrease the lo temperature by 5°F (2°C) at each key press. Remember that the oven control will no longer beep or display any further changes once the oven is set for the Sabbath feature. 8. The oven may be turned OFF at any time by pressing CANCEL pad (this will turn the oven OFF only). To turn OFF the Sabbath feature press and hold both the HI + and LO - pads hi lo for at least 3 seconds. SAb will disappear from the display. Should you experience a power failure or interruption, the oven will shut off. When power is returned the oven will not turn back on automatically. SF (Sabbath Failure) will be displayed in the oven control display and the surface element displays. The oven will remember that it is set for the Sabbath and the food may be safely removed from the oven while still in the Sabbath feature, however the oven cannot be turned back on until after the Sabbath. After the Sabbath observance turn OFF the Sabbath feature. Press and hold both the HI + and LO - pads for at hi lo least 3 seconds. SAb will disappear from the display and the oven may be used with all normal functions. For further assistance, guidelines for proper usage, and a complete list of models with the Sabbath feature, please visit the web at http:\\www.star-k.org. Notes for the use of the cooktop in Sabbath mode: • When the Sabbath feature is enabled on the oven control, it is also enabled on the cooktop. To activate the Sabbath feature, it is not necessary to have one burner ON, but it is necessary to have a Bake function active in the oven. • When the Sabbath feature is enabled, a surface element can be turned ON by pressing the ON/OFF pad. The element will turn ON 15 to 30 seconds after the ON/OFF pad was pressed. Once a surface element is on, its display shows "Sb". • When the Sabbath feature is enabled, the power level of an active element can be changed. The change will take effect after a 15 to 30 seconds delay. The element size (inner/outer) CANNOT be changed.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56

42
SABBATH FEATURE
(CONTINUED)
Oven Controls
Note:
You may change the oven temperature once baking has started. The
HI
+
hi
key pad will
increase the temperature by 5°F (2°C) at each key press. The
LO
-
lo
key pad will decrease the
temperature by 5°F (2°C) at each key press. Remember that
the oven control will no longer
beep or display any further changes
once the oven is set for the Sabbath feature.
8.
The oven may be turned OFF at any time by pressing
CANCEL
pad (this will turn the
oven OFF only). To turn OFF the Sabbath feature press and hold both the
HI
+
hi
and
LO
-
lo
pads
for at least 3 seconds.
SAb
will disappear from the display.
Should you experience a power failure or interruption, the oven will shut off. When power is
returned the oven will not turn back on automatically.
SF
(Sabbath Failure) will be displayed in
the oven control display and the surface element displays. The oven will remember that it is set
for the Sabbath and the food may be safely removed from the oven while still in the Sabbath
feature, however the oven cannot be turned back on until after the Sabbath. After the Sabbath
observance turn OFF the Sabbath feature. Press and hold both the
HI
+
hi
and
LO
-
lo
pads for at
least 3 seconds.
SAb
will disappear from the display and the oven may be used with all normal
functions. For further assistance, guidelines for proper usage, and a complete list of models with
the Sabbath feature, please visit the web at
http:\\www.star-k.org.
Notes for the use of the cooktop in Sabbath mode:
When the Sabbath feature is enabled on the oven control, it is also enabled on the cooktop.
To activate the Sabbath feature, it is not necessary to have one burner ON, but it is necessary
to have a Bake function active in the oven.
When the Sabbath feature is enabled, a surface element can be turned ON by pressing the
ON/OFF pad. The element will turn ON 15 to 30 seconds after the ON/OFF pad was pressed.
Once a surface element is on, its display shows “
Sb
”.
When the Sabbath feature is enabled, the power level of an active element can be changed.
The change will take effect after a 15 to 30 seconds delay. The element size (inner/outer)
CANNOT be changed.