Electrolux E23BC78IPS Owners Guide - Page 9
To adjust the flipper mullion
UPC - 012505746345
View all Electrolux E23BC78IPS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Installation 9 4 Lift the door while adjusting the washer. To raise the door, rotate washer clockwise (when viewed from the bottom). To lower door, rotate washer counter-clockwise (when viewed from the bottom). 2 Adjust flipper mullion height. For proper connection with the flipper mullion guide, there should be a separation about the thickness of a coin (0.060 inches, or 1.5 mm) between the guide and flipper mullion. Raising/Lowering Door 5 Re-tighten the set screw, ensuring it is between the spokes of the set washer. Set screw will not be tight, just insert until it is flush with the hinge. Adjusting Flipper Mullion Height 3 Re-tighten set screw. Set Screw To adjust the flipper mullion: 1 Loosen the set screw located on the flipper mullion hinge. Adjusting Flipper Mullion Screw