Electrolux E24RD75KPS Owners Guide - Page 10

Maintenance

Page 10 highlights

10 Maintenance in the direction of the grain. Always finish this process with a high quality, all-in-one stainless steel cleaner/polish to prevent further problems. • USE OF ABRASIVE PADS SUCH AS SCOTCHBRITE WILL CAUSE THE GRAINING IN THE STAINLESS TO BECOME BLURRED. • Rust that is allowed to linger can penetrate into the surface of the stainless steel and become impossible to remove. CAUTION • Stainless steel models exposed to chlorine gas and moisture such as areas with spas or swimming pools, may have some discoloration of the stainless steel. Discoloration from chlorine gas is normal. Follow exterior cleaning instructions. • NEVER USE CHLORIDE TO CLEAN STAINLESS STEEL. Interior Cleaning - as Required 1 Disconnect power to the refrigerator drawers. 2 Wipe down the interior with a solution of non- abrasive mild detergent and warm water. 3 Rinse with clear water. 4 Reconnect power to the unit. To Replace the Air Filter: ­1. Fully extend lower drawer. Air filter is located on lower left wall of cabinet. 2. Remove old filter and replace with a new PureAdvantageTM air filter. Remove and Replace

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12

10
Interior Cleaning - as Required
1
Disconnect power to the refrigerator drawers.
2
Wipe down the interior with a solution of non-
abrasive mild detergent and warm water.
3
Rinse with clear water.
4
Reconnect power to the unit.
To Replace the Air Filter:
1.
Fully extend lower drawer. Air filter is
located on lower left wall of cabinet.
2.
Remove old filter and replace with a new
PureAdvantage
TM
air filter.
Remove
and
Replace
Maintenance
CAUTION
• Stainless steel models exposed to chlorine
gas and moisture such as areas with spas or
swimming pools, may have some discoloration
of the stainless steel. Discoloration from
chlorine gas is normal. Follow exterior cleaning
instructions.
• NEVER USE CHLORIDETO CLEAN STAINLESS
STEEL.
in the direction of the grain. Always finish this
process with a high quality, all-in-one stainless
steel cleaner/polish to prevent further problems.
• USE OF ABRASIVE PADS SUCH AS
SCOTCHBRITE WILL CAUSE THE GRAINING
IN THE STAINLESS TO BECOME BLURRED.
• Rust that is allowed to linger can penetrate into
the surface of the stainless steel and become
impossible to remove.