Electrolux E30DF74GPS Owners Guide - Page 26
Starting The Oven Self-clean Cycle
View all Electrolux E30DF74GPS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
26 Care & Cleaning Starting the oven Self-clean cycle If you are planning to use the oven directly after a self-clean cycle remember to allow time for the oven to cool down and the oven door to unlock. This normally takes about one hour. So to self-clean for 3 hours will actually take about 4 hours to complete. ! warning During the self-cleaning cycle, the outside of the range can become very hot to the touch. DO NOT leave small children unattended near the appliance; they may be burned if they touch the hot oven door surfaces. ! caution DO NOT force the oven door open. This can damage the automatic door locking system. Use care when opening the oven door after the self-cleaning cycle. Stand to the side of the oven when opening the door to allow hot air or steam to escape. The oven may still be VERY HOT. To start a Self-Cleaning cycle: 1. Be sure oven is empty and the oven door is closed. 2. Turn the selector knob to Clean position. 3. The corresponding indicator light will flash. 4. Turn the Temperature Control Knob to Clean position. 5. The Lock indicator light will flash while transitioning from unlock to lock. It will stop flashing when the door is locked. note If the "Racks" indicator light is flashing when the clean mode is initiated, the oven racks and rack glides with supports have not been removed. It will continue flashing, once the selector knob is set back to the off position and the racks and rack glides with supports are removed from the oven. 6. As soon as the controls are set to clean, the motor driven oven door lock will begin to close automatically. Once the door has been locked the indicator light will stop flashing and remain on. Allow about 30 seconds for the oven door lock to close.