Electrolux E30MO75HPS Specification sheet - Page 3
Combination Installation - microwave
UPC - 012505559082
View all Electrolux E30MO75HPS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
30" Combination Installation - Built-In Microwave/Single Wall Oven For detailed product dimensions and installation specifications, refer to model-specific product page and installation guide on web 24" min. 30" Built-In Microwave Cutout 21" min. For models: 211/2" max. E30MO75HPS E30MO75HSS 2" (visible gap)* 30" Electric Single Wall Oven Cutout For models: E30EW75GPS E30EW75GSS 28 1/2" min. 28 7/8" max. * Minimum 2 1/8" clearance required from bottom of Built-In Microwave cutout to top edge of Wall Oven's faceplate, leaving a 2" visible gap between both product faceplates. ** Critical dimension - MUST be applied 31" suggested distance 4 1/2" min. required 28 1/2" min. 29" max. 28 1/2" min. 29" max. 30 1/8" min. 6" 4" 18" CL 24" min.** (critical dimension) 120V/60 Hz grounded electrical outlet should NOT be located within shaded area Full plywood base required to support 150 lbs. 4"x 4" opening to route armoured cable Full base required to support 200 lbs. 2" min. Bottom cutout edge must be finish cut 3" max. Electrical junction box location 30" Combination Installation Specifications • Always consult local and /or national electric codes. (Refer to product-specific electrical specifications on this page.) • Minimum 24"deep cutout dimension is critical for proper combination installation, to ensure that each built-in product's faceplate will fit flush against cabinet front. • Bases must be level and cabinet front must be square. • Minimum 4-1/2" required distance from bottom of Wall Oven cutout to floor, 31" suggested. • Respect critical dimensions as noted for proper installation of built-In products. • Minimum 23-1/4" clearance needed for Wall Oven door depth when open. 30" Built-In Convection Microwaves Specifications • Product Weight - (E30MO75HPS / E30MO75HSS) 84 Lbs. • Voltage Rating - 120V / 60 Hz / 15 Amps • Connected Load (kW Rating) @ 120 Volts = 1.6 kW (For use on adequately wired 120V, dedicated circuit having 2-wire service with a separate ground wire. Appliance must be grounded for safe operation.) • Amps @ 120 Volts = 13.7 Amps • Full oven base of solid plywood or similar material required, capable of supporting 150 Lbs. • Minimum 2-1/8" clearance required from bottom of Built-In Microwave cutout to top edge of Wall Oven's faceplate, leaving a 2" visible gap between both product faceplates. 30" Electric Single Wall Ovens Specifications • Product Weights - (E30EW75GPS) 178 Lbs. / (E30EW75GSS) 175 Lbs. • Single phase 3- or 4-wire cable, 120 / 240 or 120 / 208 Volt, 60 Hertz AC only electrical supply with ground required on separate circuit fused on both sides of line. • Connected Load (kW Rating) @ 240 / 208 Volts = 4.0 / 3.0 kW • Amps @ 240 / 208 Volts = 16.6 / 14.4 Amps • Full oven base of solid plywood or similar material required, capable of supporting 200 Lbs. Note: For planning purposes only. Refer to Product Installation Guide on the web at electroluxicon.com for detailed instructions. Electrolux Major Appliances, N.A. USA • 250 Bobby Jones Expressway • Augusta, GA 30907 • 1-877-4electrolux (1-877-435-3287) • electroluxicon.com CANADA • 5855 Terry Fox Way • Mississauga, ON L5V 3E4 • 1-800-265-8352 • electroluxicon.ca MODD_EW INST 03/09 © 2009 Electrolux Home Products, Inc. High standards of quality at Electrolux Home Products, Inc. mean we are constantly working to improve our products. We reserve the right to change specifications or discontinue models without notice. Printed in the U.S.A.