Electrolux E30WD75GTT Owners Guide - Page 9
General Care & Cleaning
View all Electrolux E30WD75GTT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
General Care & Cleaning 9 TO REMOVE AND REPLACE WARMER DRAWER ! WARNING Turn the warmer drawer to OFF before removing the drawer. DO NOT touch the warmer drawer element. The element may still be hot enough to cause burns, even if it is dark in color. To Remove Warmer Drawer: 1. Turn power off before removing the warmer drawer. 2. Open the drawer to the fully opened position. 3. Locate glide lever on each side of drawer, pull up on the right glide lever and push down on the left glide lever (See Figure 1). 4. Pull the drawer away from the range. To Replace Warmer (Warm & Ready™) Drawer: 1. Pull the plastic slider to the front of the glide slots on each side of the drawer cavity (See Figure 2). 2. Align the glide on each side of the drawer with the drawer cavity glide slot. 3. Push the drawer into the drawer cavity until glide levers "click" (approximately 2"). If you do not hear the glide levers "click" or the drawer does not feel seated remove the drawer and repeat steps 1 thru 3. Left glide Lever Pull down lever with finger Lever Pull up lever Right glide with finger Figure 1 ! WARNING Electrical Shock Hazard can occur and result in serious injury or death. Disconnect appliance from electric power before cleaning and servicing the warmer drawer. Figure 2