Electrolux E32AF85PQS Product Specifications Sheet English - Page 3
Built-In All Freezer Specifications, Built-In Look Specifications, Optional Trim Kit Specifications - installation
![]() |
View all Electrolux E32AF85PQS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Built-In All Freezer E32AF85PQS professional series 32" Built-In All Freezer Specifications • Product Weight - 245 Lbs. • An electrical supply with grounded three-prong receptacle is required. The power supply circuit must be installed in accordance with current edition of National Electrical Code (NFPA 70) and local codes & ordinances. • Voltage Rating - 115V / 60 Hz • Connected Load (kW Rating) @ 115 Volts = 0.55 kW • Amps @ 115 Volts = 5 Amps • Always consult local and national electric & plumbing codes. • Water line for ice maker can enter opening through floor or rear wall. Copper tubing recommended between cold water line and water connection location. Water line tubing recommended is 48" minimum length by 1/4" diameter. Installation of easily accessible shutoff valve in water line required. • Minimum 25-1/4" depth requires recessed electrical outlet and copper water line. • To allow for ease of installation, tape excess power cord to back of unit. • To allow for ease of moving out side-by-side units after installation, 84" minimum length of coiled copper tubing recommended. • When installing freezer adjacent to wall, cabinet or other appliance that extends beyond front edge of unit, 20" minimum clearance recommended to allow for optimum 140° door swing, providing complete drawer / crisper access and removal. (Absolute 4" minimum clearance will ONLY allow for 90° door swing which will provide limited drawer / crisper access with restricted removal.) • Freezer must be placed on level surface of hard material, same height as flooring. Surface must support approximately 800 lbs. when fully loaded. Unit equipped with 4-point leveling. "Built-In Look" Specifications • Minimum opening of 72" H x 33" W x 25-1/4" D required for single-unit "Built-In Look" installation; 66" W required for double-unit installation. ( 72" H to be measured from finished floor to underside of soffit or overhead cabinet.) Optional Trim Kit Specifications For planning information, refer to model-specific Trim Kit Installation pages on web. • Optional Trim Kits available for built-in installation with All Refrigerator and / or All Freezer - requiring different cutout dimensions. • Designed as built-in replacement option for any model(s) having pre-existing opening(s) with same cutout dimensions as stated for specific Trim Kit or for new-build installation. • Remove all wall / floor molding prior to built-in installation. • For detailed Trim Kit installation, refer to instructions packed with kit or on web. Note: F or planning purposes only. Refer to Product Installation Guide on the web at electroluxicon.com for detailed instructions. Optional Accessories • 84" Louvered Trim Kits: Single - (PN# ECP8436SS), Double - (PN# ECP8472SS). • 72" Collar Trim Kits: Single - (PN# ECP7236SS), Double - (PN# ECP7272SS). • 79" Louvered/ 75" Collar Trim Kits: Single - (PN# TRIMKITSS1), Double - (PN# TRIMKITSS2). Electrolux Major Appliances, N.A. USA • 10200 David Taylor Drive • Charlotte, NC 28262• 1-877-4electrolux (1-877-435-3287) • electroluxicon.com CANADA • 5855 Terry Fox Way • Mississauga, ON L5V 3E4 • 1-800-265-8352 • electroluxicon.ca E32AF85PQS 09/14 © 2014 Electrolux Home Products, Inc. High standards of quality at Electrolux Home Products, Inc. mean we are constantly working to improve our products. We reserve the right to change specifications or discontinue models without notice.
![](/manual_guide/products/electrolux-e32af85pqs-product-specifications-sheet-english-2a3872e/3.png)