Electrolux E36DF76TPS Installation Instructions English - Page 12

Models - Glide Racks, Models - Ladder Rack Supports

Get Electrolux E36DF76TPS PDF manuals and user guides View all Electrolux E36DF76TPS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

30" & 36" DUAL FUEL RANGE INSTALLATION INSTRUCTIONS 6.3 36" Models - Ladder Rack Supports 1. Remove the thumb screws located on each side of the oven cavity (see Figure 16). 6.4 36" Models - Glide Racks On 36" models, the glide tracks for the gliding oven racks come pre-installed on the ladder rack supports (see Figure 18). Figure 16: Ladder rack thumb screw 2. Place the ladder racks into the support brackets located on the oven sides (see Figure 17). Figure 18: Ladder rack glides The glide racks appear slightly different than the flat racks (see Figre 19). Only the glide racks can be installed onto the glide tracks. 1. Extend the two bottom glides fully out of the oven. 2. Place the glide rack on top of the glides. 3. Near the back of the rack, fit the rack slot onto the track tabs. Near the front of the rack, fit the track pin into the hole on the rack (see Figure 19). 4. Once the rack is installed, it can be pulled in and out of the oven cavity on the glide tracks. Repeat for the top set of glides. Figure 17: Ladder rack supports 3. Replace the screws removed in Step 1. Figure 19: Installing glide racks The glide racks can only be used in these positions. The racks may be removed from the tracks and used like a regular flat rack on all the other rack positions. Insert regular flat oven racks in any desired position. 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
12
30" & 36" DUAL FUEL RANGE INSTALLATION INSTRUCTIONS
6.4
36" Models - Glide Racks
On 36" models, the glide tracks for the gliding oven racks
come pre-installed on the ladder rack supports (see
Figure 18).
The glide racks appear slightly different than the flat
racks (see Figre 19). Only the glide racks can be
installed onto the glide tracks.
1.
Extend the two bottom glides fully out of the oven.
2.
Place the glide rack on top of the glides.
3.
Near the back of the rack, fit the rack slot onto the
track tabs. Near the front of the rack, fit the track pin
into the hole on the rack (see Figure 19).
4.
Once the rack is installed, it can be pulled in and out
of the oven cavity on the glide tracks. Repeat for the
top set of glides.
The glide racks can only be used in these positions.
The
racks may be removed from the tracks and used like a
regular flat rack on all the other rack positions.
Insert regular flat oven racks in any desired position.
6.3
36" Models - Ladder Rack Supports
1.
Remove the thumb screws located on each side of the
oven cavity (see Figure 16).
2.
Place the ladder racks into the support brackets loca-
ted on the oven sides (see Figure 17).
3.
Replace the screws removed in Step 1.
Figure 16: Ladder rack thumb screw
Figure 17: Ladder rack supports
Figure 18: Ladder rack glides
Figure 19: Installing glide racks