Electrolux E36EC70FSS Specification sheet - Page 1

Electric Touch-Control Drop-In Cooktop E36EC70FSS 5 Element Configuration One 9" / 12" double element (1700W / 2700W), two 5" / 7" / 9" triple elements (1000W / 1800W / 2700W) and two 6" elements (1200W) are arranged to provide five concentric rings of incomparable choices. Ceramic Smoothtop Glass Glass cooktop is flat, smooth and easy to clean and maintain. 36" ELECTRIC TOUCH-CONTROL DROP-IN COOKTOP Configuration 5 Electric Elements FEATURES Black Ceramic Smoothtop Glass Surface Yes 6" Element - 1200W 2 5" to 7" to 9" Element - 1000W / 1800W / 2700W 2 9" to 12" Dual Element - 1700W / 2700W 1 Custom-Set™ Electronic Controls Yes A.D.A. Compliant* Yes ACCESSORIES Granite Countertop Installation Kit - PN # 903061-9010 Optional SPECIFICATIONS Overall Exterior Dimensions - Height Width Depth Power Supply Location Amps @ 240 / 208 Volts Connected Load (kW Rating) @ 240 / 208 Volts Electrical - Single phase 3- or 4-wire cable, 120 / 240 V or 120 / 208 V, 60 Hz, fused on both sides of line with ground. Armored Electrical Cable Approved for Single Oven Combination Installation** Approved for Downdraft Vent Combination Installation** Shipping Weight (Approx.) 5" 36-3/4" 21-1/2" Middle 44.0 / 38.0 10.5 / 7.9 Required Included Yes Yes 56 Lbs. *When properly installed, meets the appliance standards in the Americans with Disabilities Act and the Architectural Barriers Act Accessibility Guidelines as published by the United States Access Board on June 23, 2004, as amended August 5, 2005. **Approved to be used over any Electrolux ICON® Single Wall Oven and in combination with an Electrolux ICON® Downdraft Vent. NOTE: Always consult local and national electric codes. Refer to Product Installation Guide for detailed installation instructions on the web at electroluxicon.com. Specifications subject to change. Custom-Set™ Touch-Controls The smooth cooktop surface is undisturbed with knobs for a look that is sleek and flush with your countertop. Hot Surface Indicator For added safety, when an element is still hot, a blue LED indicator will stay on until surface cools. electroluxicon.com