Electrolux E36GC75PSS Complete Owner's Guide (English) - Page 9

Using the simmer plate accessory not included, Location of the Burners, Placement of burner caps

Get Electrolux E36GC75PSS PDF manuals and user guides View all Electrolux E36GC75PSS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

Surface Cooking 9 Using the simmer plate (accessory not included) The simmer plate (Figure 1) is intended to diffuse lower temperature of the burner to help cooking delicate aliment such as chocolate, milk, bechamel, etc. It can also be use for cooking sauce during long period. With the grate in position over the burner, set the simmer plate on top of the grate positioning the notches in the simmer plate over the grate fingers (See Figure 2) and then place the utensil on the simmer plate. Figure 1 Figure 2 Always place the simmer plate on the grate before to turn on the burner. Always use potholders to remove the simmer plate from the grate. Allow the simmer plate to cool before removing. Do not set hot simmer plate on surfaces that cannot withstand high heat; such as countertops. Be sure the simmer plate is positioned correctly and stable before use to prevent hot spills and possible burns. Location of the Burners The cooktop is equipped with different sized burners. The surface burners are located on the cooktop as follows: - a 5 000 BTU (natural gas) burner located at the center rear position; - a 9 500 BTU (natural gas) burner located at the right rear position; - two 14 000 BTU (natural gas) burners located at the left rear and center front position; - and two 20 000 BTU (natural gas) burners located at the left front and right front position. Placement of burner caps Place a burner cap on each burner Burner head, matching the cap size to the Cap head size. The cap for each burner has an inner locating ring which centers the cap correctly on the burner head. Be sure that all the burner caps and burner heads are correctly placed BEFORE using your appliance. Make sure each burner cap is properly aligned and level. Turn the burner on to determine if it will light. If the burner does not light, contact a Service Center. Do not service the sealed burner yourself. Burner Head ATTENTION: Do not slide the burner caps on the cooktop, doing so can damage the surface. Burner Head Burner Cap Burner Simmer Precision Flame

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
9
Surface Cooking
Using the simmer plate (accessory not included)
Always place the simmer plate on the grate before to turn on the burner.
Always use potholders to remove the simmer plate from the grate. Allow the simmer plate to cool before removing.
Do not set hot simmer plate on surfaces that cannot withstand high heat; such as countertops.
Be sure the simmer plate is positioned correctly and stable before use to prevent hot spills and possible burns.
Figure 1
Figure 2
The simmer plate (Figure 1) is intended to
diffuse lower temperature of the burner to help
cooking delicate aliment such as chocolate, milk,
bechamel, etc. It can also be use for cooking
sauce during long period. With the grate in
position over the burner, set the simmer plate
on top of the grate positioning the notches in the
simmer plate over the grate
fi
ngers (See Figure
2) and then place the utensil on the simmer plate.
The cooktop is equipped with different sized burners.
The surface burners are located on the cooktop as follows:
- a
5 000 BTU
(natural gas) burner located at the center
rear position;
- a
9 500 BTU
(natural gas) burner located at the right rear
position;
- two
14 000 BTU
(natural gas) burners located at the left
rear and center front position;
- and two
20 000 BTU
(natural gas) burners located at the
left front and right front position.
Location of the Burners
Place a burner cap on each burner
head, matching the cap size to the
head size. The cap for each burner has
an inner locating ring which centers the
cap correctly on the burner head. Be
sure that all the burner caps and burner
heads are correctly placed BEFORE
using your appliance.
Make sure each burner cap is properly
aligned and level.
Turn the burner on to determine if it
will light. If the burner does not light,
contact a Service Center. Do not
service the sealed burner yourself.
ATTENTION:
Do not slide the burner
caps
on the cooktop, doing so can
damage the surface.
Placement of burner caps
Burner
Cap
Burner
Head
Burner Simmer
Precision Flame
Burner
Cap
Burner
Head