Electrolux EFDG317TIW Installation Instructions English Spanish French - Page 19

C Reinstalling Door Assembly, D Reinstalling Latch Cover and Hole Plugs, E Verify Reversed Door

Get Electrolux EFDG317TIW PDF manuals and user guides View all Electrolux EFDG317TIW manuals
Add to My Manuals
Save this manual to your list of manuals

Page 19 highlights

Reversing Door C) Reinstalling Door Assembly 1. Rotate the door and hang the upper hook on the back of the hinge in the upper hole of the front panel. D) Reinstalling Latch Cover and Hole Plugs 1. Install door latch cover with screws removed earlier. 19 x 2 2. Reinstall and tighten all four screws removed earlier - two front screws first, then two side screws. 2. Insert plastic hole plugs removed earlier. 1 3 x 4 42 x 2 E) Verify Reversed Door Operation 1. Test door for free, smooth swinging operation and secure latching when closed. 2. Plug in dryer and close the door. Start a test cycle: drum should tumble until door is pulled open or cycle is paused or canceled.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
19
Reversing Door
x
4
1
2
3
4
x
2
x
2
C) Reinstalling Door Assembly
1.
Rotate the door and hang the upper hook
on the back of the hinge in the upper hole
of the front panel.
D) Reinstalling Latch Cover and Hole Plugs
1. Install door latch cover with screws
removed earlier.
E) Verify Reversed Door Operation
1. Test door for free, smooth swinging
operation and secure latching when
closed.
2. Plug in dryer and close the door. Start
a test cycle: drum should tumble until
door is pulled open or cycle is paused or
canceled.
2. Reinstall and tighten all four screws
removed earlier - two front screws first,
then two side screws.
2. Insert plastic hole plugs removed earlier.