Electrolux EFLS210TIW Complete Owner s Guide English - Page 23

Solutions to Common Problems

Page 23 highlights

Solutions to Common Problems 23 Common Washing Problems Many washing problems involve poor soil and stain removal, residues of lint and scum, and fabric damage. For satisfactory washing results, follow these suggestions provided by The Soap and Detergent Association. PROBLEM Blue stains Discoloration, graying Greasy, oily stains Holes, tears, or snags Lint Pilling (Fibers ball up and cling to fabric.) Residue or powder on dark items; Stiff, harsh fabrics. POSSIBLE CAUSES • Undiluted liquid detergent or fabric softener dispensed directly onto fabric. • Not enough detergent. • Wash water temperature too low. • Incorrect sorting. • Not enough detergent. • Undiluted liquid fabric softener poured directly on fabric. • Incorrect use of chlorine bleach. • Unfastened zippers, hooks, buckles. • Rips, tears and broken threads. • Overloading the washer. • Degradation of fabric. • Incorrect sorting. • Tissues left in pocket. • Overloading the washer. • Not enough detergent. • Undissolved detergent has left a residue resembling lint. • Static cling is attracting lint. • Load washed too long. • Pilling is normal with synthetic and permanent press fabrics. This is due to abrasion from normal wear. • Undissolved detergent. • Some granular detergents can combine with hard water minerals to form a residue. • Overloading the washer. SOLUTIONS • If caused by detergent, mix 1 cup (240 ml) white vinegar with 1 quart (.95 L) water in a plastic container. Soak item 1 hour. Rinse. • If caused by fabric softener, rub stains with bar soap. Wash. • Rewash with correct amount of detergent and hottest water safe for fabric. • Add bleach safe for fabric. • Treat with prewash stain remover or liquid detergent. • Increase detergent and water temperature. Rewash. • Rub fabric softener stains with bar soap. • May be irreversible if rips, tears and seams cannot be mended. • Reduce load size. Rewash using correct water temperature, water level, and amount of detergent. • Add nonprecipitating water conditioner to wash water to remove detergent residue. • Add liquid fabric softener to final rinse. • Dry load in dryer. • Remove lint with lint brush or roller. • Use a lint brush or shaver to remove pills. • Rewash load. PREVENTIVE MEASURES • Avoid overfilling detergent and fabric softener compartments of dispenser. • Sort items by soil level and color. • Use correct amount of detergent, hottest water and bleach safe for fabric. • Use correct amount of detergent and hottest water safe for fabric. • Do not pour liquid fabric softener directly on fabric. See Operating Your Washer. • Never pour chlorine bleach directly on fabric. • Check condition of items before washing. See Operating Your Washer. • See Operating Your Washer. • Do not overload washer. • Use correct temperature and amount of detergent, water and wash time. • Use fabric softener in the washer to lubricate fibers. • When ironing, use spray starch or fabric finish on collars and cuffs. • Turn items inside out to reduce abrasion. • Increase water temperature using hottest water safe for fabric. • Do not overload washer. • Use liquid detergent or use non- precipitating water conditioner with powder detergent.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28

23
Many washing problems involve poor soil and stain removal, residues of lint and scum, and fabric damage. For satisfactory wash-
ing results, follow these suggestions provided by The Soap and Detergent Association.
PROBLEM
POSSIBLE CAUSES
SOLUTIONS
PREVENTIVE MEASURES
Blue stains
• Undiluted liquid detergent
or fabric softener dispensed
directly onto fabric.
• If caused by detergent, mix 1 cup
(240 ml) white vinegar with 1 quart
(.95 L) water in a plastic container.
Soak item 1 hour. Rinse.
• If caused by fabric softener, rub
stains with bar soap. Wash.
• Avoid overfilling detergent and
fabric softener compartments of
dispenser.
Discoloration,
graying
• Not enough detergent.
• Wash water temperature
too low.
• Incorrect sorting.
• Rewash with correct amount of
detergent and hottest water safe
for fabric.
• Add bleach safe for fabric.
• Sort items by soil level and color.
• Use correct amount of detergent,
hottest water and bleach safe for
fabric.
Greasy, oily
stains
• Not enough detergent.
• Undiluted liquid fabric
softener poured directly on
fabric.
• Treat with prewash stain remover
or liquid detergent.
• Increase detergent and water
temperature. Rewash.
• Rub fabric softener stains with
bar soap.
• Use correct amount of detergent
and hottest water safe for fabric.
• Do not pour liquid fabric softener
directly on fabric. See Operating
Your Washer.
Holes, tears, or
snags
• Incorrect use of chlorine
bleach.
• Unfastened zippers, hooks,
buckles.
• Rips, tears and broken
threads.
• Overloading the washer.
• Degradation of fabric.
• May be irreversible if rips, tears
and seams cannot be mended.
• Never pour chlorine bleach directly
on fabric.
• Check condition of items before
washing. See Operating Your
Washer.
Lint
• Incorrect sorting.
• Tissues left in pocket.
• Overloading the washer.
• Not enough detergent.
• Undissolved detergent has
left a residue resembling lint.
• Static cling is attracting lint.
• Load washed too long.
• Reduce load size. Rewash using
correct water temperature, water
level, and amount of detergent.
• Add nonprecipitating water con-
ditioner to wash water to remove
detergent residue.
• Add liquid fabric softener to final
rinse.
• Dry load in dryer.
• Remove lint with lint brush or roller.
• See Operating Your Washer.
• Do not overload washer.
• Use correct temperature and
amount of detergent, water and
wash time.
Pilling
(Fibers ball up
and cling to
fabric.)
• Pilling is normal with syn-
thetic and permanent press
fabrics. This is due to abra-
sion from normal wear.
• Use a lint brush or shaver to
remove pills.
• Use fabric softener in the washer to
lubricate fibers.
• When ironing, use spray starch or
fabric finish on collars and cuffs.
• Turn items inside out to reduce
abrasion.
Residue or
powder on dark
items;
Stiff, harsh
fabrics.
• Undissolved detergent.
• Some granular detergents
can combine with hard
water minerals to form a
residue.
• Overloading the washer.
• Rewash load.
• Increase water temperature using
hottest water safe for fabric.
• Do not overload washer.
• Use liquid detergent or use non-
precipitating water conditioner with
powder detergent.
Common Washing Problems
Solutions to Common Problems