Electrolux EFLS517SIW Complete Owner s Guide English - Page 13
Cycle Settings, continued
View all Electrolux EFLS517SIW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Operating Instructions Cycle Settings, continued sanitize, continued NOTE The heavy duty and whitest whites with sanitize setting cycles have been designed to meet the requirements of NSF P172 protocol for sanitization efficacy. NSF Protocol P172 Sanitization Performance of Residential and Commercial, Family-Sized Clothes Washers The wash water is heated by an internal boost heater to a maximum of 152° F (67° C) as the load tumbles. Cold water is added to cool down the load prior to drain and spin. NOTE If the voltage at your outlet is under 110 v, the internal heater may not adequately heat the wash water. If the cycle is interrupted while the water is heating, the final temperature of the wash water may be lower and sanitation may be reduced. As a precaution, the washer door remains locked when the water temperature reaches 130° F (55° C). hot Use this setting for heavily soiled white or colorfast cottons and blends. warm Use this setting for normally soiled white or colorfast cottons or blends. cold Some warm water will automatically blend with cold tap supply to achieve a precise cold. Use this setting for lightly soiled non-colorfast items, knits, delicates, and hand washables. eco cold Wash and rinse temperatures are equivalent to temperature of cold tap supply. Use this selection for fabrics and colors that are prone to dye transfer. For use with cold water detergents. Soil Level Adjust the wash time based on the soil level of each load. Max (on select models), heavy, normal, light and extra light soil levels are available. Spin Speed Max (on select models), high, medium and low spin speeds are available for each cycle. The spin speed and/or duration of final spin vary from model to model and cycle to cycle. Increasing the spin speed will extract more water, decrease drying time and conserve energy. Decreasing the spin speed will reduce wrinkling. Select low spin speed to gently spin items that should be line dried. Use no spin to omit the final spin at the end of the cycle. The load will be very wet. Remove items from the wash drum to drip dry or select a spin only cycle to remove excess water at a more convenient time. 13