Electrolux EFLS517STT Installation Instructions English Spanish French - Page 13
Reversing Door Assembly, continued, E Reinstalling Door Assembly, E Verify Reversed Door Operation
View all Electrolux EFLS517STT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Reversing Door Assembly, continued 2. Lift door glass slightly and rotate 180 degrees, setting it back onto outer door. Make sure the alignment tabs reengage. Reversing Door 13 2. Slide terminal cap onto back of hinge plate until tabs snap into place. 180 3. Reinstall inner door onto outer door with nine screws removed earlier. x 9 3. Insert hinge locating pins into the hole that were previously covered by the plastic hole cover. Press on the face of the hinge to snap the other locating pins into place. E) Reinstalling Door Assembly 1. Insert the wiring harness terminal into the terminal cap and wrap the harness into the harness retainer. 4. Reinstall all four screws removed earlier. x 4 E) Verify Reversed Door Operation 1. Test door for free, smooth swinging operation and secure latching when closed. 2. Plug in washer and close the door. Test correct door lock operation by starting a test cycle: lock should engage, and door should not be able to be opened until cycle is paused or canceled.