Electrolux EFLS527UTT Wiring Diagram English - Page 4

4 Washer Error Codes Washer Error Codes, continued Error Code 5C 5D 5E 5F 62 66 (on select models) 68 (on select models) 69 (on select models) 6A (on select models) 71 (on select models) 74 83 84 (on select models) 85 (on select models) 86 87 88 (on select models) 91 92 93 94 97 98 9C 9E H1/B1 H2/B2 H3/B3 HE/BE HF/BF F2 Error Description High Voltage experienced by motor control board Communication problem with motor control (message) Communication problem from motor control (communication failure) MC is continuously resetting Wash temperature too high Heater relay problem Current leakage to ground on heater or wiring Heater open Heater relay sensing problem Drum water NTC failure. (tub heater) Wash temperature does not increase Wrong selector reading Recirculation pump triac sensing failure which stops the cycle Recirculation pump triac alarm which stops the cycle Incorrect UI selection table User interface micro-controller fault Concentrated wash pump triac alarm User interface protocol incongruence error User interface mother board protocol incongruence Console or main board control problem (incompatible machine configuration) Main board control problem (incompatible cycle configuration) Console or main board control problem (incompatible cycle configuration) Incompatible motor control/main board User interface configuration problem Touch sensor on user interface not responding Frequency of power out of limits Supply voltage too high (incoming voltage) Supply voltage too high (incoming voltage) Control Relay fault Control relay sense fault Too much soap or wrong type F4 Flow meter is not running when valves are driven F5 Load unbalanced F6 Control reset F9 Hot valve warning - hot water and cold water hoses reversed C1 Flow meter is running when no valves are driven Display Notification No No No No No No No No No No No No No No No No No Yes Yes Yes Yes Yes No Yes No Yes Yes Yes No No Yes No No No Yes No Next Step Refer to test (12) Refer to test (10) Refer to test (10) Refer to test (10) Refer to tests (13 and 14) Refer to test (14) Refer to test (14) Refer to test (14) Refer to test (14) Refer to test (13) Refer to tests (13 and 14) Refer to test (10) Replace main board Refer to test (21) Refer to test (11) Refer to test (11) Refer to test (22) Refer to test (11) Refer to test (11) Refer to test (11) Refer to test (10) Refer to test (11) Refer to test (10) Refer to test (11) Refer to test (20) Refer to test (18) Refer to test (18) Refer to test (18) Refer to test (18) Refer to test (18) Advise customer to reduce detergent or change to high efficiency, type Refer to test (23) Redistribute load and restart Refer to test (19) Reverse the water hoses to reduce the risk of water temperature related problems with the load Refer to test (24)