Electrolux EFMG517STT Installation Instructions English Spanish French - Page 18

18 Reversing Door IMPORTANT BEFORE YOU REVERSE YOUR DRYER DOOR: 1. Be sure you have adequate swing area before reversing door. 2. Gather your tools - including a screw driver with a #2 square bit and plastic knife (or small, flat prying tool that won't damage paint). 3. Be sure dryer is unplugged from power source! WARNING ELECTRICAL SHOCK HAZARD Failure to disconnect power source before servicing could result in personal injury or even death. Tools needed for reversal: Screwdriver with #2 square bit Plastic knife A) Removing Latch Cover and Hole Plugs 1. Open the door. 2. Remove plastic hole plugs and save to reinstall later. You may have to use a nanscratching plastic knife if you are unable to dislodge the plugs manually. B) Removing Door Assembly 1. Completely open the door to expose all four hinge screws. 2. Remove all four hinge screws with #2 square bit driver. Save for reinstalling later. x 2 3. Remove both screws from door latch cover. Save cover and screws for reinstallation later. x 4 3. Grasp the door with both hands and lift slightly as you pull door and hinge away from the front panel. x 2