Electrolux EFMG527UIW Complete Owners Guide English - Page 24
Reversing the door, Removing latch and hole plugs, BEFORE YOU REVERSE YOUR DRYER
View all Electrolux EFMG527UIW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
24 Installation Reversing the door NOTE Door reversibility is available on all dryer models. IMPORTANT Tools needed for reversal: BEFORE YOU REVERSE YOUR DRYER DOOR: 1. Be sure you have adequate swing area before reversing door. 2. Gather your tools - including a screw driver with a #2 square bit and plastic knife (or small, flat prying tool that won't damage paint). 3. Be sure dryer is unplugged from power source! Screwdriver with #2 square bit Plastic knife WARNING ELECTRICAL SHOCK HAZARD Failure to disconnect power source before servicing could result in personal injury or even death. Removing latch and hole plugs 1. Open the door. 2. Remove plastic hole plugs and save to reinstall later. You may have to use a non-scratching plastic knife if you are unable to dislodge the plugs manually. 3. Remove both screws from door latch. Save latch and screws for reinstallation later. x2 x2