Electrolux EFMG527UTT Complete Owners Guide English - Page 25
Reinstalling door assembly, Reinstalling latch and hole plugs, Verify reversed door operation
View all Electrolux EFMG527UTT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Installation 25 Removing door assembly 1. Completely open the door to expose all four hinge screws. 2. Remove all four hinge screws with #2 square bit driver. Save for reinstalling later. Reinstalling latch and hole plugs 1. Install door latch with screws removed earlier. x2 x4 2. Insert plastic hole plugs removed earlier. 3. Grasp the door with both hands and lift slightly as you pull door and hinge away from the front panel. x2 Reinstalling door assembly 1. Rotate the door and hang the upper hook on the back of the hinge in the upper hole of the front panel. Verify reversed door operation 1. Test door for free, smooth swinging operation and secure latching when closed. 2. Plug in dryer and close the door. Start a test cycle: drum should tumble until door is pulled open or cycle is paused or canceled. 2. Reinstall and tighten all four screws removed earlier - two front screws first, then two side screws. x4 31 42