Electrolux EI23BC32SS Complete Owner s Guide English - Page 41
Concern, Potential Cause, Common Solution, Opening/Closing Of Doors/Drawers, Running of Refrigerator
View all Electrolux EI23BC32SS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Solutions to Common Problems 41 Concern Potential Cause Common Solution Opening/Closing Of Doors/Drawers Door(s) will • Door was closed too hard, • Close both doors gently. not close. causing other door to open slightly. • Refrigerator is not level. It rocks on the floor when moved slightly. • Ensure floor is level and solid, and can adequately support the refrigerator. Contact a carpenter to correct a sagging or sloping floor. • Refrigerator is touching a wall or cabinet. • Ensure floor is level and solid, and can adequately support the refrigerator. Contact a carpenter to correct a sagging or sloping floor. Drawers are • difficult to move. • Food is touching shelf on • top of drawer. Track that drawers slide on • is dirty. Remove top layer of items in drawer. Ensure drawer is properly installed on track. • Clean drawer, rollers, and track. See Care & Cleaning. Running of Refrigerator Compressor • does not run. • Freezer control is set to "OF". Refrigerator is in defrost cycle. • Set freezer control. • This is normal for a fully automatic defrost refrigerator. The defrost cycle occurs periodically, lasting about 30 minutes. • Plug at electrical outlet is • Ensure plug is tightly pushed into disconnected. outlet. • House fuse blown or tripped circuit breaker. • Check/replace fuse with a 15 amp time-delay fuse. Reset circuit breaker. • Power outage. • Check house lights. Call local electric company. Refrigerator • seems to run too much or too long. Your variable speed compressor is designed to run 100% of the time except during the defrost cycle. At times it will run faster, such as after a defrost cycle. • It is normal for the compressor to run continuously except during defrost mode. Digital Temperature Setting Display Digital • temperature displays an error. Electronic control system has detected a performance problem. • Call your Electrolux service representative, who can interpret any messages or number codes flashing on the digital displays.