Electrolux EI23CS65KS Complete Owner's Guide (English) - Page 7

Caution

Get Electrolux EI23CS65KS PDF manuals and user guides View all Electrolux EI23CS65KS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 7 highlights

Installation 7 Installing Shelves Your refrigerator was shipped with the shelf hanger and shelf locking clip installed in their shipping position. Below are the instructions to install the shelves in your desired locations. 1 Detach clip from the back of hanger by pushing down on the top of the clip and pulling the clip towards you. 4 Reinsert clips by positioning prongs on either side of the hanger hook and pushing down on the top of the clip until it fits into the slot. 5 While holding shelf at a 45-degree angle with the gray handle facing you, push the shelf directing into the back of the hanger. 2 Lift the hanger directly upwards and then towards you to remove it from the ladder. 6 Gently set the shelf onto the hanger once the back is secured by the hanger. 3 Place top hooks of the hanger into the desired slot, and lower straight down until lower hooks rest on the ladder. CAUTION Shelves must be removed prior to moving the refrigerator. NOTE Features may vary according to model.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
7
Installation
Installing Shelves
Your refrigerator was shipped with the shelf hanger
and shelf locking clip installed in their shipping
position. Below are the instructions to install the
shelves in your desired locations.
1
Detach clip from the back of hanger by
pushing down on the top of the clip and
pulling the clip towards you.
2
Lift the hanger directly upwards and then
towards you to remove it from the ladder.
3
Place top hooks of the hanger into the
desired slot, and lower straight down until
lower hooks rest on the ladder.
4
Reinsert clips by positioning prongs on either
side of the hanger hook and pushing down
on the top of the clip until it fits into the slot.
6
Gently set the shelf onto the hanger once the
back is secured by the hanger.
5
While holding shelf at a 45-degree angle with
the gray handle facing
you, push the shelf
directing into the back of the hanger.
CAUTION
Shelves must be removed prior to moving the
refrigerator.
NOTE
Features may vary according to model.