Electrolux EI23CS65KS Wiring Diagram (English Español França - Page 2
Ice Maker Information
![]() |
View all Electrolux EI23CS65KS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
ICE MAKER INFORMATION Test Cycling Press the momentary contact on the ON/OFF switch for approximately 15 seconds. Ice maker will continue to complete the cycle. Water Fill Volume The water fill can be adjusted without removing the ice maker cover. To adjust the fill size, remove the small round plug next to the On/Off Switch. Insert a #2 Phillips screwdriver into the hole about an inch or until it engages the Water Fill Adjustment Screw. Turn the screw clockwise to reduce the fill size; turn the screw counterclockwise to increase the fill size. One turn equals approx 20cc (0.68 oz). The correct fill is 85 to 95cc (2.75 to 3.25 oz). When a water valve is replaced, check the fill volume. Water Fill Adjustment Motor Gear Mounting Plate Screw TUR Mounting N Plate Screws Ice Maker ON/OFF Switch Timing Gear ICE MAKER SPECIFICATIONS Electrical 115 vac (127 vac max) Thermostat Opens at 48° F ( 9° C), Closes at 9° F ( -13° C) Heater Wattage 112 watts ICE MAKER CONNECTOR PLUG CONNECTIONS Wire Number Wire Color Connects to: 1 Green/Yellow Ground 2 Yellow Water Valve 3 Black Line 4 Light Blue Neutral 242164701 ELECTROLUX SxS
![](/manual_guide/products/electrolux-ei23cs65ks-wiring-diagram-english-espa241ol-fran231ais-f35b73b/2.png)