Electrolux EI23SS55HW Use and Care Guide - Page 14

14 Controls IQ-TouchTM (some models) IMPORTANT Pressing the system off icon does not turn off power to your refrigerator. You must unplug the power cord from the wall outlet. Your refrigerator is equipped with a Glass Touch Panel user interface display. It is only necessary to touch the glass. There is no need to press with force. There are three dispenser modes: 1 Water 2 Ice Cubes 3 Crushed Ice A red indicator light will be illuminated above the active mode. Touch the icon to activate the options below. Any of the following options that are activated have a red indicator light above the icon. fast ice Increases the production of ice fast freeze Activates a faster rate for freezing food dispenser light On / Off control lock Press and hold for three seconds to activate and deactivate. This restricts undesired changes to the refrigerators settings and prevents use of the ice and water dispenser. vacation mode Conserves energy by increasing the time between automatic defrost. This feature is automatically activated during long periods between door openings. Vacation mode is manually activated when the red indicator is lit. water filter Touch to display filter condition status. Press and hold for three seconds to reset. air filter Touch to display filter status. Press and hold for three seconds to reset. temp display Touch to toggle the freezer and fridge temps display on and off. Touch and hold temp display to toggle display from Fahrenheit to Celsius. mute sounds Tones emitted by each keypress can be turned off based on user preference. The sounds are muted when the red indicator is lit. Warning signals will stay active. factory default Resets all refrigerator settings such as temp, temp display and ring tones to their factory default settings. on off Press and hold for three seconds to turn off the cooling system to clean the refrigerator. It also turns off all dispenser functions. The temperature display will read OFF. Setting cooling temperatures 1 Touch the glass panel to illuminate the display to the Plus (+) and minus (-) indicators which appear on either side of the displayed temperatures. 2 Press the + or - indicator to adjust the temperature to the desired setting. The temperature display will begin to blink with the first touch. The display times out after 5 seconds and returns to the basic display. Alarms Door Ajar High Temp Power Fail If the door has been left open for an extended period of time, an alarm will sound and the door ajar indicator will display on the right side of the display. The alarm is turned off by closing the door. The mute sounds key will illuminate to prompt the reset of any pending alarms. Press this key to reset any system alarms. In the event of a high temperature condition, the temperature display will display "HI". After 20 minutes, the high temp alert will be displayed and the mute sounds icon will illuminate until pressed, acknowledging the alarm, at which time the highest temperature reached will be displayed and the refrigerator will resume normal operation. All other modes are turned off until the alarm is acknowledged. In the event of a power failure, the power fail alert will be displayed and the mute sounds icon will be illuminated and you will hear an audible alarm until the mute sounds icon is pressed, acknowledging the alarm. Other modes may be turned off until the alarm is acknowledged. When the power fail alert is turned off the refrigerator will resume normal operation. The high temp alarm may also be illuminated until a safe operating range temperature has been reached.