Electrolux EI24RD65HS Complete Owner's Guide (English) - Page 6
Leveling the Unit, Site Preparation - weight
UPC - 012505746208
View all Electrolux EI24RD65HS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
6 Installation Site Preparation 1 Position the unit on a flat, level surface capable of supporting the entire weight of the unit. Remember the unit will be significantly heavier once it is fully loaded. 2 This unit requires a grounded and polarized 115 VAC, 60Hz, 15A circuit (normal household current). 3 Avoid connecting the unit to a Ground Fault Interruptor (GFI). GFIs are prone to nuisance tripping which will cause the unit to shut down. GFIs are generally not used on circuits which power equipment that must run unattended for long periods of time. 4 The unit must be installed according to your local codes and ordinances. warning The Anti-Tip Kit must be installed on this unit before it is used. Double stacking units may cause serious personal injury. warning ELECTROCUTION HAZARD! Electrical Grounding Required - This appliance is equipped with a three prong (grounding) polarized plug for your protection against possible shock hazards. • NEVER remove the round grounding prong from the plug. • NEVER use a two-prong grounding adapter. • NEVER use an extension cord to connect power to the unit. Where a two-prong wall receptacle is encountered or a longer power cord is required, contact a qualified electrician to have it replaced in accordance with applicable electrical codes. Leveling the Unit Position the unit on a flat, level surface capable of supporting the entire weight of the unit when full. This unit contains four (4) adjustable leveling legs. Turn the legs clockwise to raise and counterclockwise to lower. 5 Position the unit to allow free air flow through the front grille. 6 Wipe out inside of unit with a damp cloth. 7 Be sure to install the Anti-Tip bracket. Follow the instructions provided with the Anti-Tip bracket kit.