Electrolux EI26SS55GS Product Specifications Sheet (English) - Page 2

Side-by-Side Refrigerators EI26SS55GS Side-by-Side Refrigerator Specifications • Product Weight - 325 Lbs. • An electrical supply with grounded three-prong receptacle is required. The power supply circuit must be installed in accordance with current edition of National Electrical Code (NFPA 70) and local codes & ordinances. • Voltage Rating - 120V / 60 Hz / 15 or 20 Amps • Connected Load (kW Rating) @ 120 Volts = 1.02 kW • Amps @ 120 Volts = 8.5 Amps • Always consult local and/or national electric & plumbing codes. • Optimum door swing factory set for 130°. When installing next to wall where handle may make contact, allow 4-1/2" minimum clearance for 90° door swing. At 90° door stop position, drawer access will be maintained but removal will be restricted. • Refrigerator must be placed on level surface of hard material, capable of supporting unit when fully loaded. "Built-In Look" Specifications • Minimum opening of 69-3/4" H x 36" W x 28-7/8" D required for standard "Built-In Look." • Remove all wall / floor molding prior to installation. • Recess electrical outlet when possible. • Water recess on rear wall recommended to prevent water line damage. (Minimum tubing size recommended is 48" x 1/4"). Note: For planning purposes only. Refer to Product Installation Guide on the web at electroluxappliances.ca or supplied with product for detailed instructions. CANADA • 5855 Terry Fox Way • Mississauga, ON L5V 3E4 • 1-800-265-8352 • electroluxappliances.ca EI26SS55GS 12/10 © 2008 Electrolux Major Appliances, NA Printed in Canada