Electrolux EI28BS51IW Complete Owner's Guide (English) - Page 9

Installation 9 4 Lift the door while adjusting the washer. To raise the door, rotate washer clockwise (when viewed from the bottom). To lower door, rotate washer counter-clockwise (when viewed from the bottom). To adjust the flipper mullion: 1 Loosen the screw located on the flipper mullion hinge. Raising/Lowering Door 5 Re-tighten the screw, ensuring it is between the spokes of the set washer. Screw will not be tight, just insert until it is flush with the hinge. Adjusting Flipper Mullion Screw 2 Adjust flipper mullion height. For proper connection with the flipper mullion guide, there should be a separation about the thickness of a coin (0.060 inches, or 1.5 mm) between the guide and flipper mullion. Screw NOTE If after adjusting doors higher the door makes a popping/clicking sound, remove screw and replace with the longer one supplied in the handle package. Adjusting Flipper Mullion Height 3 Re-tighten screw.