Electrolux EI30EW35PS Complete Owner's Guide (English) - Page 6
Before Setting Oven Controls - wall oven
View all Electrolux EI30EW35PS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
6 Before Setting Oven Controls BEFORE SETTING OVEN CONTROLS Oven Vents The oven vent is located under the control panel. When the oven is on, warm air passes through this vent. This venting is necessary for proper air circulation in the oven and good baking results. Do not block oven vent. Steam or moisture may appear near the oven vent. This is normal. Types of Oven Racks Flat Oven Rack Flat oven racks (or the flat handle oven rack) may be used for most cooking needs and may be placed in most oven rack positions. Oven Vent Warm Air Figure 2: Flat oven rack Figure 1: Oven vent location Some models are equipped with a cooling fan that runs during the cooking process to cool internal electronic components. It is normal for this fan to continue to run for an extended period of time, even when the oven is off. Do not line the oven walls, racks, bottom, or any other part of the oven with aluminum foil. Doing so will alter heat distribution, produce poor baking results, and may cause permanent damage to the oven interior. During fresh clean temperatures, the oven will be hot enough to melt foil. Figure 3: Flat handle oven rack Offset Oven Rack (Some Models) The offset oven rack provides additional stepdown positions from the standard flat rack design. The offset design positions the base of the rack about 1/2 of a rack position lower than the flat rack and may be used in most oven rack positions. Always use potholders or oven mitts when removing food or adjusting the oven racks. Wait until the oven in completely cooled if possible. Oven racks may be very hot and may cause burns. Arranging, Removing, and Replacing Flat or Offset Oven Racks • To Arrange: Always arrange the oven racks when the oven is cool (prior to operating the oven). • To Remove: Pull the oven rack straight forward until it reaches the stop position. Lift up front of oven rack slightly and slide out. • To Replace: Place the oven rack on the rack guides on the oven walls. Tilt the front of the rack upward slightly and slide the oven rack back into place. Figure 4: Offset oven rack Luxury-Glide™ Oven Rack The fully extendable Luxury-Glide™ oven rack allows you to effortlessly extend your food away from the oven. Figure 5: Luxury-Glide™ Oven Rack