Electrolux EI30GF55GB Complete Owner's Guide (English) - Page 54
F15, F20, F23, F25, F30, F31
View all Electrolux EI30GF55GB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
54 Solutions to Common Problems Problem Oven smokes excessively during broiling Flames inside oven or smoking from oven vent Oven control panel beeps & displays any F code error (for example F10, F11, F13, F14, F15, F20, F23, F25, F30, F31 or F90) Before you call Solution • Control not set properly. Follow broiling instructions under Setting Oven Controls. • Make sure oven door is closed when broiling. • Meat too close to the broil burner. Reposition the broil rack to provide proper clearance between the meat & the element. Preheat the broil burner for searing. • Meat not properly prepared. Remove excess fat from meat. Cut remaining fatty edges to prevent curling, but do not cut into lean. • Insert on broiler pan wrong side up & grease not draining. Always place grid on the broiler pan with ribs up & slots down to allow grease to drip into pan (some models). • Grease has built up on oven surfaces. Regular cleaning is necessary when broiling frequently. Old grease or food spatters cause excessive smoking. • Excessive spillovers in oven. For example this will happen for pie spillovers or large amounts of grease left on the oven bottom. Wipe up excessive spillovers before starting oven. If flames or excessive smoke are present see "About broiling" in theSetting Oven Controls section. • Oven control has detected a fault or error condition. Press CANCEL to clear the display & stop beeping. Try the bake or broil feature again. If the F code error repeats, remove power supply to appliance, wait 5 minutes and then repower the appliance and set clock for the time of day. Try the bake or broil feature again. If the fault recurs, record fault and call for service. Questions or for service call: 1-877-4ELECTORLUX (1-877-435-3287)